Troubleshooting Guide; Auxiliary Input Jack - Blaupunkt CR127 User Manual

Auxiliary Input Jack

Connect other audio equipment, such as a portable DAT player, through the 1.2 volt/3.5
mm pigtail connector. Access auxiliary equipment output by pressing SRC until "InP"
appears. Adjust volume, bass, and treble settings through head unit.

Troubleshooting Guide

The following check will assist in the correction of most problems which you may encounter with your
unit. Before going through the check list below, refer back to the connection and operating procedures.
General
Trouble
No sound.
Radio reception
Trouble
Preset stations are not receivable.
Automatic tuning is not possible.
Travel Store feature does not complete
storing of six stations.
* Also make sure that antenna is connected, extended and dry inside.
If the above mentioned solutions do not help to improve the situation, consult your nearest Blaupunkt dealer or in
• Adjust the volume with the + button.
• With a two-speaker system set the fader control to the center
position.
• The broadcast is too weak.
• The broadcast is too weak. —> Use manual tuning.
• Not enough broadcast frequencies are receivable.
the United States call 1-800-266-2528.
Cause/Solution
Cause/Solution*
16