Advertisement
LOCATION OF CONTROLS
INSTRUCTIONS-GENERAL
OPERATION
"Press" means momentary press ol less than l/2 seconds.
Ignition-Off Clock Recall - You can check the lime when the vehicle ignition is off by
simply pressing the AUD Button. The time stays displayed for five seconds.
Turning Untf On - Vehlcte ,g",t,o" must be on To turn "",t on, press PWR Button 0,
Turning Unit Off - Press the PWR Button to turn the unit off.
Volume - Press the + and - Buttons lo quickly increase or decrease the volume lo the
disappears from the display. You can then gradually adjust the volume in either
direction. making precise adjustment easy.
Adjustable Turn-On Volume - First adjust the volume lo the (maxImum) volume level
seconds. The unit turns off and the turn-on volume level is memorized. When the unit is
turned on, the volume will be at the memorized level, even it the unit was turned Ott
lower level when the unit is turned back on.
Changing the Information Olsplayed
. To change the display pnonty. press the AUD Butlo" for two seconds The display
pnonty changes. In the ,ad!o mode, the dlsptay pnonty chotces are clock and radio
frequency. In the CD mode, the display pnonty choices are CloCk. track "umber, and
elapsed track 11me
. To change the display temporarily. press and release the AUD Button one Or two
times to access the desired information.' After five seconds, the display changes back IO
the priority inlotmation.
Bass and Treble
Press AUD Button as needed lo select tt)e Bass cmce more lo reach Treble mode. The
level is indicated in the Display Window. Press the + Button 0, - Bulton to increase 0,
decrease the level:
Press AUD Butlon as needed to select the Balance mode The balance
the Display Wmdow Press the + bunon to shift sound to the left Press - button to shdt
sound io right.
Fader
Press AUD Button as many times as needed to select the Fader mode. The level of
output for Iron1 and back speakers is indicated in the Display Window. Press the +
button to shift sound lo the front. Press
button lo shift sound to ,ea,.
complete you, adtustments. the unit will
wilt revert
the volume mode and the display
.
.
.
.
AUD mode (except to, hour and minute adtust). 11 no button
TROUBLESHOOTING GUIDE
The toltowng check wll as?& m the co,recl,on of most problems which you may
Radio receptlo"
Trouble
Automatic tuning Is not possible
It the above menhoned sotuhons do not help to improve the sltuatlon, ConSuIt your nearest
Loudness
Press LO Bu,,on 10 actwafe o, deactwe loudness
RADIO OPERATION
Automatic Steraaono
When an FM stereo program with a signal strength of at lea+ 50 dBt is tuned in, the
and noisy. the unit automatically blends the signals, eliminating the noise and gadually
converts to the monaural o,"mono" mode. The stereo symbol will disappear from the
Display.
Selecting the Band
Press the BND bulton as many times as necessan/ to select the desired band.
Locate the opening on the bottom of the unit designated wth a label. It "ecessaly. move
the switch in the opening to the desired FM tuning standard as indicated by the label.
Automatic Seek Tuning
Select the desired band. Press and release the A or V butlon to s&k the next receivable
station. To stop seeking and return to the previously tuned Irequency, press the other of
the A 0, V buttons.
Manual Tuning
Select the dewed band. To beg," manual luning. press and hold the e 0, w button fO,O 5
seconds. The band
station scan
scan press the same butlo"
Press the SCN button for more than 2 seconds to activate preset scan. The unit scans
scan and listen to a desired preset station, press SCN again.
to
needed
Press AUD once mole to
Manually Storing lndlvldual Preset Stations
1. Select the desired band using the BND button.
2. Tune in the desired frequency using seek 0, manual tuning.
3. Press and hold down the desired preset button for 2 seconds.
4. The frequency blinks and the audio mutes to one second to confirm storage.
COMPACT DISC OPERATION
Playing A Disc-Check Display to make sure that "DISC IN" indicator is not lit. Insert a
disc into the Disc Slot with the label sulfate facing up. "LOAD" and "DISC IN" appear in
the display. The track number and "DISC IN" indicator will appear in the Display. Play
starts at the beginning,ot
Do not insert a 3.inch CD.
When a CD is already in the unit, simply press the CD Button to switch from radio lo CD
playback.
IS
put in the case.
Track Up/Down - Press the A Button or V Bulton to locate the desired track. Track
number appears in the display.
Cue and Review - Press and hold the A Bunon or V Button lo rapidly advance forward 0,
backward to the desired position of the track during playback.
Repeat Play - Press the RPT (Repeal Play) Bulton to repeat the same selection. The
back to the p,wity display. clock 0,
will appear in the Display. To cancel, press this button again.
CD Scan -Press SCN Button to $ta,t CD Track Scan; start of scan mode is tndlcated by
Pause - Press the Pause Button (II>) during playback. Play will stop. Press agaln to
pressed to,
IS
. The broadcast
too weak
IS
. The broadcast
IS
- - - -
Reception Adjustment
stations
the desired preset button. Then the frequency a"d Ihe
preset number wll appear
the first selection (TRACK)
E-04
Mechanical error.
mode is active. Fou,
SIX
frequency
Eject and insert clean, undamaged disc
property (print side up).
Under normal temoerature cond,t,o"s.
and ,nse" clean, undamaged disc
properly
Eject and reinsert.
Advertisement
