Tires, Wheels And Ballast - Kioti DK90 Owner's Manual

5
-26 DK90
TIRES, WHEELS AND
BALLAST
(A) Insufficient (B) Standard
(C) Excessive
Though the tire pressure is factory-set
to the prescribed level, it naturally
drops slowly in the course of time.
Thus, check it everyday and inflate as
necessary.
! ! ! ! !
WARNING
Do not use tires larger than speci-
fied.
Do not attempt to mount a tire.
This should be done by a quali-
fied person with the proper
equipment. Qualified persons
with the proper tire mounting
equipment should recognize the
following warning.
S43O530A
Never exceed 241 kPa (35 psi)
when attempting to seat a bead.
If beads have not been seated by
the time the pressure reaches 241
kPa (35 psi), deflate the
assembly, reposition the tire on
the rim, reduplicate and reinflate.
After seating the bead, adjust in-
flation pressure as recom-
mended in the inflation pressure
chart.
INFLATION PRESSURE
Though the tire pressure is factory-set
to the prescribed level, it naturally
drops slowly in the course of time.
Thus, check it everyday and inflate as
necessary.
Classi-
Tire Size
fication Pressure
220Kpa, 32psi
AG 12.4 24PR
2.3kg/cm²
138Kpa, 20psi
18.4 34PR
AG
1.4kg/cm²
NOTE
Maintain the maximum pressure in
front tires, if using a front loader or
when equipped with a full load of
front weights.
Inflation