Simo_Chn Function; Description; Object Name (Type+Number); Calling Obs - Siemens SIMOCODE DP Programming And Operating Manual

SIMO_CHN Function

3.1

Description

3.1.1

Object Name (Type+Number)

FB659
SIMO_CHN Function Block Inputs / Outputs
3.1.2

Calling OBs

The watchdog interrupt OB in which the block is installed (e.g. OB32). Also, in OB 100
(see Startup Response).
3.1.3

Function

The function block is used for operating and monitoring the SIMOCODE-DP 3UF5 motor
protection and control device.
The following 9 control functions are supported:
Sl no.
1
2
3
4
5
6
7
8
9
SIMOCODE DP PCS 7 Library Migration (Legacy) - V9.0 SP2
Programming and Operating Manual, 09/2019, A5E48307694002A/RS-AA/001
Control functions
Overload (OVL)
Direct starter (DIR)
Reversing starter (REV)
Star-delta starter (STAR)
Dahlander starter (DAHL)
Pole changing starter (POL)
Valve (VALVE)
Positioner 1-5 (POS)
Soft starter (SOFT)
3
11