sparkfun ESP8266 Hook-Up Manual page 20

1/23/2018
Before uploading, make sure to paste your authoriazation token into the
network settings into the
Then upload!
Run the Project
After the app has uploaded, open the serial monitor, setting the baud rate to 9600. Wait for the "Ready (ping: xms)." message.
https://learn.sparkfun.com/tutorials/esp8266-thing-development-board-hookup-guide/all
ESP8266 Thing Development Board Hookup Guide - learn.sparkfun.com
Blynk.begin(auth, "ssid", "pass")
variable. Also make sure to load your WiFi
auth[]
function.
20/24