Adjust Volume; Power; Batteries; Battery Life - Cochlear Osia 2 User Manual

To change programs, press and release the button
on your sound processor.
If enabled, audio and visual signals will let you know
which program you are using.
• Program 1: 1 beep, 1 orange flash
• Program 2: 2 beeps, 2 orange flashes
• Program 3: 3 beeps, 3 orange flashes
• Program 4: 4 beeps, 4 orange flashes
NOTE
You will only hear the audio signal if you are wearing
your sound processor.

Adjust volume

Your hearing care professorial has set the volume level
for your sound processor.
You can adjust the volume level with a compatible Cochlear
remote control, Cochlear Wireless Phone Clip, iPhone, iPad
or iPod touch (see the Made for iPhone section on page 19).
8

Power

Batteries

The Osia 2 Sound Processor uses a high power 675 (PR44) zinc air
disposable battery designed for hearing implant use.
CAUTION
If a standard 675 battery is used the device will not function.

Battery life

Batteries should be replaced as needed, just as you would with
any other electronic device. Battery life varies according to your
implant type, the thickness of skin covering your implant, and
which programs you use each day.
Your sound processor has been designed to provide the majority
of users with a full day of battery life when using zinc air batteries.
It will automatically go into sleep mode after you remove it
from your head (~30 seconds). When it is attached again, it will
automatically turn on again within a few seconds. As sleep mode
will still consume some power, the device should be turned off
when not in use.
9