Selecting The Frequency Range / Memory; Setting The Station; Adjusting The Sensitivity Of The Station Search - Blaupunkt Pasadena CD71 Operating And Installation Instructions

The radio functions menu appears in the dis-
play.
Press the softkey 4 assigned to the
"REG" display item.
When the Regional function is switched on/
off, "REG ON" or "REG OFF" appears briefly
in the display.
To return to the main radio menu,
press the TUNE button > or wait eight
seconds. The settings are saved.
Selecting the frequency range /
memory
This unit can receive programmes broadcast
over the FM, MW and LW frequency ranges
(in USA/LATIN tuner mode: FM and AM).
There are three preset memory levels avail-
able for the FM range and one for each of the
MW (AM) and LW (AMT) ranges.
Six stations can be stored on each memory
level.
Selecting the FM memory level
To switch between the FM memory levels,
keep pressing the softkey 4 assigned
to the "NEXT" display item until the re-
quired memory level appears in the dis-
play.
The memory levels are displayed in the fol-
lowing order: FM I, FM II, FMT.
Selecting the frequency range
To select the FM, MW or LW frequency range
(in USA/LATIN tuner mode: FM, AM or AMT),
press the TUNE button > in radio
mode.
The radio function menu is shown on the dis-
play.
Press the softkey, 4, indicating "BND"
as often as necessary for the desired
waveband to be shown in the display.
To return to the basic radio menu
RADIO OPERATION
Press the TUNE button, >, or wait for
eight seconds. The settings are then
saved.

Setting the station

There are a number of ways to set the sta-
tion.
Automatic station search
Press the or
The next station that can be received is tuned
in.
Manual station tuning
You can also tune to the station manually.
Press the or
Note:
Manual station tuning is only possible if the
RDS convenience function is deactivated.
Browsing a chain of stations (FM only)
If a station is providing several programs it is
possible to browse through this "chain" of sta-
tions.
Press the or
change to the next link in the station
chain.
Note:
In order to use this function, the RDS con-
venience function must be active.
You can only change in this way to a station
that you have already received once. To do
this, use the Scan or Travelstore functions.
Adjusting the sensitivity of the
station search
You can choose whether to search only for
stations with strong signals, or whether weak
stations should be included.
Press the MENU button, 8.
Press the or
as is necessary for "FM-SENS" to ap-
pear in the display.
button, 7.
button, 7.
button, 7, in order to
button, 7, as often
43