Advertisement
C FITTING/REMOVING THE WAND
1 Unplug the appliance before fitting or removing the wand.
2 To fit, push the wand on to the end of the handle
3 To remove, press the 5 buttons, and pull the wand off the handle.
C SPEED BUTTONS
4 Put the plug into the power socket (switch it on, if it's switchable).
5 Press the top button (I) for low speed, release to switch off.
6 Press the bottom button (II) for high speed, release to switch off.
7 Generally, large quantities, thick mixes, and a high ratio of solids
to liquids suggest longer timings and low speed.
8 Smaller quantities, thinner mixes, and more liquids than solids
suggest shorter timings and high speed.
C THE WAND
9 Generally, the wand can do anything a normal blender can do,
but faster, and with less washing up – blend, pulp or purée
ingredients in the pan or bowl you're going to cook them in.
10 Whatever container you use, make sure it's on a stable, flat
surface, and support it with your free hand, to prevent it moving.
11 Don't immerse the wand past the top of the tube.
12 Use the wand in bursts of a few seconds, otherwise you
risk overdoing it.
13 Don't run the motor continuously for more than 30
seconds, then let it cool for 1 minute before re-using it.
14 Avoid spraying/splashing:
a) hold the wand straight
b) don't switch on till it's inside the food container
c) switch off before lifting it out of the container
d) with liquids, switch on and off with the blade under the surface
C CARE AND MAINTENANCE
15 Switch the appliance off, and unplug it.
16 Take great care with the blades – don't touch, use a nylon brush.
17 Wipe the handle surfaces with a soft damp cloth.
18 Don't put any part of the appliance in a dishwasher.
3
Advertisement
