Installation - Saeco 0361.00B.77C Operating Instructions Manual

6 INSTALLATION

If necessary, remove
the swivel ring from the
packing container and fit
it into the machine.
Move the ON/OFF switch
to "I" to turn on the
machine.
HOT WATER
WARMING UP...
Press the button again
to terminate the circuit-
loading process.
Remove the drip tray from
the packing container and
fit it into the machine.
RINSING
WARMING UP...
The display will signal that Place a container beneath
the machine is warming the steam tube.
up.
Remove the container. The machine is ready for
use.
Fill the coffee bean Fill the tank with fresh drin-
container with coffee king water.
beans.
Press the button to start
loading the circuit.
SELECT PRODUCT
READY FOR USE
See rating plate
Insert the plug into a sui-
table electric socket.
HOT WATER
WARMING UP...
Wait until a steady stream
of water flows out from the
nozzle.
Note: You must load the circuit before starting up the
machine for the first time, if it has been inoperative for a
lengthy period or if the water tank has been completely
emptied. Moreover, the circuit must be loaded every time
the message "VENTILATE" is displayed.