Table of Contents
Advertisement
This function enables you to activate an automatic
descaling cycle. See page 10.
This is a factory-set function that automatically switches the
machine into "Standby" when 3 hours have elapsed since a
coffee was dispensed.
The switch-off time can be adjusted, in 15-minute intervals, to
a minimum of 15 minutes; the function cannot be deactivated.
This function is used to rinse all the coffee-dispensing parts
with water.
The rinsing cycle cannot be interrupted.
A person must be present during this operation.
Warning: a large quantity of water may be discharged from the
coffee brew unit. Before starting, empty out the drip tray and
keep an additional container handy.
PROGRAMMING MACHINE FUNCTIONS
DESCALING
*
SIGNAL DESCALING
When
the
function
Prepare the machine for
appears, select it using the
descaling.
"menu" button.
TIMER
*
RINSING CYCLE
When
the
function
Use the buttons to adjust
appears, select it using the
the timer setting.
"menu" button.
RINSING CYCLE
*
FACTORY SETTINGS
When
the
function
The machine will carry out
appears, select it using the
a rinsing cycle.
"menu" button.
DESCALING
FILL WATERTANK
FILL WATERTANK
Press the "menu" button to
confirm your choice.
STANDBY
STANDBY
AFTER
2:45
AFTER
Press the "menu" button to
confirm your choice.
RINSING CYCLE
*
FILL WATERTANK
FACTORY SETTINGS
When
completed this message
will be displayed:
17
DESCALING
1:15
the
cycle
is
Hide quick links:
Advertisement
Table of Contents
