Ricoh Aficio 650 Operating Instructions Manual page 14

6.
Manual Paper Select keys
Touch to select the desired paper size.
7.
[Full Size] key
Touch to scan the full size image.
8.
[Auto Reduce/Enlarge] key
Touch to have the machine choose the
scanning ratio based on the paper and
original sizes you select.
9.
Preset Reduce/Enlarge keys
Touch to select a preset ratio.
10.
[1 Sided Originals] key
Touch this key when scanning 1 sided
originals.
Note
Set your originals in the correct direc-
tion. Otherwise, you might not make
duplex printing correctly.
Refer to "Duplex – Making Two-Sided
Copies" in the Copy Reference.
11.
2 Sided Originals keys
Touch one of these keys when scanning
the 2 sided originals according to the ori-
entation of the images.
• Top to Top
The pages of this orientation can be
folded or bound along the vertical ax-
is.
• Top to Bottom
The pages of this orientation can be
folded or bound along the horizontal
axis.
Note
Set your originals in the correct direc-
tion. Otherwise, you might not make
duplex printing correctly.
Refer to "Duplex – Making Two-Sided
Copies" in the Copy Reference.
12.
[Shrink&Center(Shrink&Centre)] key
Touch to reduce the image to 93 % of its
original size with the center as reference.
13.
[Edit Image] key
Touch to edit the scanned images using
the following functions:
• Erase Centre
6
Touch to erase the center margin of
the original image.
• Erase Border
Touch to erase the surrounding area
of the original image.
• Centring
Touch to move the image to the cent-
er.
Note
When you print the document
whose image was moved to the
center using Centring function,
you should use the same paper size
as specified in the Saving menu. If
the paper size specified in printing
is different from that specified in
saving, the image cannot be moved
to the center correctly.
14.
[Combine] key
Touch to combine multiple scanned doc-
uments to be saved into one file.
15.
[Reduce/Enlarge] key
Touch to reduce or enlarge the image to
be saved into the Document Server.
16.
[Check Modes] key
Touch to check the current settings.
17.
[Scanning Complete] key
Touch to go to the "Select File" menu.