Logout; Configure Setup Wizard; Configure General Parameters - HIKVISION DS-TCG227-A Series User Manual

User Manual of DS-TCG227-A Series Entrance/Exit Capture Unit
STRONG PASSWORD RECOMMENDED–We highly recommend you create a
strong password of your own choosing (Using a minimum of 8 characters, including
at least three of the following categories: upper case letters, lower case letters,
numbers, and special characters.) in order to increase the security of your product.
And we recommend you reset your password regularly, especially in the high security
system, resetting the password monthly or weekly can better protect your product.
4. Install the plug-in before viewing the live video and operating the capture
unit. Please follow the installation prompts to install the plug-in.
 You may have to close the web browser to install the plug-in. Please reopen
the web browser and log in again after installing the plug-in.
 You may receive "New version of plugin is detected. Update it?" Click OK
to update to the latest version.

2.6 Logout

After login, click Logout to log out of the capture unit.

2.7 Configure Setup Wizard

Purpose:
By default, the Setup Wizard starts once the device has loaded. You can configure the
general parameters and adjust image.

2.7.1 Configure General Parameters

Purpose:
You can configure the IP address, subnet mask, default gateway, capture mode, and
Figure 2-4 Login Interface
12