11Bios Configuration For Ipc-Modules; 11.1. Netipc Boards - syslogic IPC/NETIPCFW-1A User Documentation

IPC/NETIPCFW-1A: User Documentation
DOC/NETIPCFW-E; V3.0
11 BIOS Configuration for IPC-Modules
For some of the IPC boards special Embedded BIOS configuration options may be necessary.
They are listed in this appendix. Please remember that the Embedded BIOS V4.x file of the
IPC/NETIPCFW-1A distribution is exclusively preconfigured for the CUB/NETIPC-1A
board and the Embedded BIOS V5.x file is exclusively preconfigured for the IPC/NETIPC-
5A board!

11.1. NETIPC boards

The IPC/NETIPC-1B board provides 8 MBytes, the IPC/NETIPC-1A 32 Mbytes, the
IPC/NETIPC-2A and -3A 64 Mbytes and the IPC/NETIPC-5A 128 MBytes of main memory.
The correct target NETIPC board must be set in the 'Target Board' screen of the BCP (or
BCPX) program to enable correct BIOS operation and the correct VGA BIOS extension must
be downloaded to the target (see chapter 5.2).
43 45
© Syslogic Datentechnik AG, CH-5400 Baden, Switzerland, http://www.syslogic.ch /