Changing The Bios Image - syslogic IPC/NETIPCFW-1A User Documentation

IPC/NETIPCFW-1A: User Documentation
DOC/NETIPCFW-E; V3.0
Menu WinCE Configuration:
Allows setting of some WindowsCE startup arguments. Please consult the WindowsCE ETK
documentation for details. WindowsCE loading/booting must be enabled to use these options.
Note: Support of these argument settings is dependent on the actual WindowsCE configuration
used to build the binary image NK.BIN.
4.5.2.

Changing the BIOS Image

To make changes to the existing BIOS image proceed as follows:
1. Run the Binary Configuration Program with START -> PROGRAMS -> FBCUBE ->
NETIPC BIOS Vx Configuration.
2. Read BIOS Image File (BIOS.BIN for BCP, BIOSF.BIN for BCPX). Press <F1> key to
load the file.
3. Edit BIOS Image.
4. Make your changes (saving the options using <F1> key).
5. Go back to the Main Options screen using <ESC> key.
6. Write BIOS Image File (confirm with 'Y').
7. Exit.
8. Run the Boot Loader and download the new BIOS image with the EBIOS or EBIOSX
command (see chapter 3 for operation of the Boot Loader).
9. Enter CMOS Setup while restarting the NETIPC and select „Reset CMOS to Factory
Defaults"
10. Save updated CMOS parameters and exit
The NETIPC has now registered the new BIOS settings and is ready for operation.
© Syslogic Datentechnik AG, CH-5400 Baden, Switzerland, http://www.syslogic.ch
23 45
/