IPC/NETIPCFW-1A: User Documentation
DOC/NETIPCFW-E; V3.0
8 Windows NT Embedded Installation
Note that you must make sure to have the legal right to load and run Microsoft Windows NT
Embedded on the target, i.e. to have a correct license. For the installation please proceed as
follows:
1. Prepare the Embedded BIOS to start the NT Embedded loader:
–
Run the NETIPC BIOS Configuration Program on your host-PC
Read-in the BIOS image file
–
–
Edit the BIOS-image
–
Enter the Disk I/O and Booting menu
Select drive A: as first boot drive
–
Save options using <F1> key
–
–
Return to main menu via <ESC> key
Write BIOS image file
–
Exit (Note: you have now generated a new binary BIOS image)
–
2. Download the new BIOS and the NT Embedded Loader into the target:
Connect the target COM1 port via a Null-Modem cable to the COMx-port of
–
your host-PC (x = port number)
–
Run the NETIPC boot loader program
Power-on the target in the boot-load mode (see DOC/IPC_NETIPC)
–
Enter INITx after the boot loader program prompt (x = host-PC COM port
–
number)
–
Wait for connection to target (Message „Target connected at .....")
Enter EBIOS (or EBIOSX) to download the new Embedded BIOS
–
–
Wait for error-free completion (Note: takes several seconds, do never
interrupt !)
Enter ENTLDR to download the NT Embedded loader.
–
Wait for error-free completion (Note: takes several minutes, do never
–
interrupt !)
Enter QUIT to automatically update the flash-tables and leave the boot loader
–
program
–
Wait for error-free completion (Note: takes several seconds, do never
interrupt !)
3. Copy the Windows NT Embedded Files on a Flash Disk:
–
Build and Install your custom Windows NT Embedded System with the
Windows NT Embedded Target Designer
Copy all Files to a Compact Flash Disk (use PCMCIA Slot in a Laptop, a
–
SanDisk Compact Flash Reader or a similar product). Be sure, that the Windows
NT Files are located in the directory \WINNT (same as with a standard NT
installation).
© Syslogic Datentechnik AG, CH-5400 Baden, Switzerland, http://www.syslogic.ch
37
45
/
Need help?
Do you have a question about the IPC/NETIPCFW-1A and is the answer not in the manual?