syslogic IPC/NETIPCFW-1A User Documentation page 42

IPC/NETIPCFW-1A: User Documentation
DOC/NETIPCFW-E; V3.0
Wait for error-free completion (Note: takes several seconds, do never
–
interrupt !)
4. Start Up the target:
Reset and Start Up the target in RUN-mode (see DOC/IPC_NETIPC)
–
The non-DOS operating system is now installed on the target. Please remember that you need
a valid run-time license (not available from Syslogic).
Use MAKEDRV2.BAT instead of MAKEDRVX.BAT and NDRIVE_2 instead of NDRIVE_X
for a 1.44 MByte ROM-Drive. See also chapter 4.4 for more information about generating a
704 kbyte or 1.44 Mbyte ROM-Disk image.
© Syslogic Datentechnik AG, CH-5400 Baden, Switzerland, http://www.syslogic.ch
42 45
/