Table of Contents
Advertisement
HAND SHOWER AND RISER
You are now ready to assemble and connect the
hand shower.
The hand shower comprises of:
Multi function hand shower
Chr
ome nished riser bar
fi
Hand shower holster
Chrome water hose
Rear retaining nut
Fitting screw
The lower part of the riser bar has a threaded water
connection. Position this part through the larger
hole on the rear glass panel.
Fit the rear fi xing nut from the rear of the shower
to hold in place. Secure the upper part of the riser
bar with the screw provided. Tighten both until
secure.
Connect the silver hand shower hose to the lower
part of the riser bar and the other end to the hand
shower head.
At the rear of the shower, locate the grey water
supply hose coming from the shower valve and
connect to the water inlet of the riser bar. Test this
water connection to ensure it is water tight. Using
some PTFE tape or other product may help to
achieve the best watertight connection.
16
Advertisement
Table of Contents
