Fitting The Door Handles - Vidalux Hydro Plus Series Installation And Operating Manual

FITTING THE DOOR HANDLES

Each of the two shower doors requires a pair of
chrome fi nished door handles to be fi tted.
Each handle is comprised of several parts. Position
the main handle part on the outside of a door
ensuring the Chrome Washer and a Clear Washer
are positioned also on the outside face over the
thread. Push the threaded ends through the glass.
Next place another clear washer on the threads
and then screw on the two diff erent Chrome Knobs
to the inside of the glass door.
Tighten until secure. DO NOT OVER TIGHTEN.
OVERHEAD/MONSOON SHOWER
The overhead shower is fitted into the ceiling from
the inside. The overhead shower first passes
though the light diffuser cover (inside the shower),
so that the threaded end of the overhead shower
passes out through the ceiling. Fit the FIXING NUT
onto the threaded end on top of the ceiling to hold
the shower and diff user cover securely in place.
Next locate the water supply hose coming from the
shower valve this is identifi ed as being the
overhead water feed. Fit the threaded end of the
water supply hose onto the overhead showers
threaded section and tighten.
REMOVE THE PROTECTIVE FILM ON THE FACE
OF THE MONSOON BEFORE USE.
TEST FOR LEAKS
Make sure the connection is tested and
is watertight. You may wish to use some
PTFE tape or other suitable products to
provide the best water tight seal on this
joint.
15