Table of Contents
Advertisement
Creating/changing a user-defi ned equalizer setting ( ADJUST)
You can adjust the three different user-defi ned equalizer settings to
different situations, e.g. for the driver alone, for driver and passenger
or for passengers in the front and the rear.
Select the user-defi ned equalizer setting which you want to create/
➔
change as described in the preceding section.
Press the softkey
➔
menu opens.
PLACE MICRO 5
AUTO :
You can automatically create one
of the three equalizer settings us-
ing a measurement microphone
(available as an accessory).
Before starting, ensure the fol-
lowing:
•
The measurement microphone
must be connected before in-
stalling the device as described
in the installation instructions
of the measurement micro-
phone.
•
There must be true silence dur-
ing the measurement since ex-
ternal noise falsify the meas-
urement. For this reason, close
all windows, doors, and the
sliding sunroof.
Changing basic settings in the settings menu
(next to "ADJUST"). The "USER EQ ADJUST"
<
ADJUST
BREAK
USER EQ-1 ADJUST
AUTO
MANUAL
DEQMAXEX
Switch off the engine, but
leave the ignition switched on.
•
The temperature inside the ve-
hicle must be below 55 °C.
•
All the loudspeakers must be
connected. The sound radi-
ating from the loudspeakers
must not be obstructed by any
objects.
Position the measurement mi-
➔
crophone
•
for the driver only – 10 cm
next to the right ear of the
driver,
•
for driver and passenger –
exactly between both at the
head level,
80 Hz +11db Q1
LOW1
LOW2
HIGH1
HIGH2
HIGH3
HIGH4
109
Hide quick links:
Advertisement
Table of Contents
