Changing the user-defi ned col-
our ( USER)
Two options are available to
change the user-defi ned colour.
Option 1:
Press the softkey
➔
"USER").
Set the desired colour using
➔
the softkeys
7
•
"RED–": Reduces the red por-
tion.
•
"GREEN–": Reduces the
green portion.
•
"BLUE–": Reduces the blue
portion.
•
"RED+": Increases the red
portion.
•
"GREEN+": Increases the
green portion.
•
"BLUE+": Increases the blue
portion.
The colour of the display
changes accordingly.
Option 2:
Press the softkey
➔
"COL -SCAN").
The display sequentially shows
all colours that can be dis-
played.
Press the softkey
➔
"SAVE") or the OK button
select the colour currently dis-
played.
Changing basic settings in the settings menu
(next to
:
to
.
<
(next to
;
(next to
7
to
A
Press the softkey
➔
"BREAK") or the ESC button
instead to exit the "COL -SCAN"
menu item without changing
the colour.
Adjusting the display viewing
angle ( ANGLE)
The angle at which the driver looks
at the display is dependent upon,
among other things, the installa-
tion position of the device, the
seating position, and the physical
size of the driver. You can adjust
the display contrast to your view-
ing angle as follows.
Press the softkey
➔
"ANGLE").
The "ANGLE" menu item is
fl ashing. The current display
contrast is shown on the main
line
.
A
On the rocker switch
➔
or
to increase the display
contrast.
On the rocker switch
➔
or
to decrease the display
contrast.
You can adjust the display
contrast in 13 increments from
–6 to +6.
Changing the brightness of the
display for day/night (BRIGHT)
See page 85.
(next to
<
@
(next to
8
, press
3
, press
3
115