Jenoptik VARIOSCAN high resolution Series Manual page 37

Select the configuration to be deleted from the list. The STANDARD
configuration and the currently active configuration will not appear on
this list.
If there are no further configurations stored, no list will appear and the
Delete module directly finished.
Temperature supervision
Image Format
This menu allows you to select the
upper and lower limits of the
temperature monitoring system as
well as the desired action.
The following actions are available:
The "Alarm" action displays the
message T overl. (Key!) or T underl.
(Key!) as well as an alarm buzzer.
In this menu, the 360 x 240 pixel full-
screen mode can be switched to
modes with reduced line number in
order to increase the scanning
frequency by a factor of 2 or 4.
Operation
37