Operation; Recording Mode - Jenoptik VARIOSCAN high resolution Series Manual

8

Operation

8.1

Recording mode

After you have switched on the camera, the system automatically starts
an internal initialisation routine. During initialisation the hardware is set
to defined default states. At the end of initialisation, the recording mode
is active.
•
‚
ƒ
„
...
†
‡
ˆ
Focusing keys
With these keys (∧ , ∨
Pressing the keys once increases/reduces the focus distance in steps.
In single step mode, consider that every key pressure aborts the
running image grabbing process. This results in the following effect:
Focusing
Zoom selection
Brightness adjustment (Level)
Contrast adjustment (Range)
Storage
Colour palette
Spot temperature measurement
Freeze mode
∧ , ∨ ) you can focus the camera on to the object.
Operation
21