Small Form Factor Pluggable Transceivers - Avaya Virtual Services Platform 7000 Series Installation Manual

more information about Out of Band Management configuration, see Avaya Virtual Services
Platform 7000 Series Getting Started (NN47202–303).
USB port
The USB port is a Standard Type-A female USB 2.0 port. The switch provides USB host
functionality, and can support USB flash drives.

Small form factor pluggable transceivers

The switch supports Avaya Small Form Factor Pluggable (SFP) and Small Form Factor
Pluggable Plus (SFP+) transceivers. SFP and SFP+ transceivers are devices designed to
allow Gigabit connection speeds over various media types and distances. SFP transceivers
support connection speeds of 1 Gbps, and SFP+ transceivers support connection speeds of
10 Gbps.
SFP and SFP+ support
The switch ports allow you to use SFP or SFP+ transceivers to interface the switch to fiber
optic or unshielded twisted pair network cabling. Pluggable transceivers can support various
media types, modes, and cable distances of up to 70 km. Any cable reach over 100 m requires
fiber optic cable. You must select appropriate transceivers and cabling that can support your
required cable distances and network architecture.
The following tables show the supported SFP and SFP+ transceivers.
Table 3: Supported SFP+ transceivers
1–PORT 10GBASE-ER SFP+ (LC) SINGLE MODE up to 40 km
1–PORT 10GBASE-LR SFP+ (LC) SINGLE MODE up to 10 km
1–PORT 10GBASE-SR SFP+ (LC) MULTI-MODE FIBRE up to 400 m AA1403015–E6
1–PORT 10GBASE-LRM SFP+ (LC) MULTI-MODE FIBER up to 220
m
SFP+ DIRECT ATTACH CABLE — 10 m
SFP+ DIRECT ATTACH CABLE — 5 m
SFP+ DIRECT ATTACH CABLE — 3 m
Table 4: Supported SFP transceivers
1-PORT SFP 1000BASE-CWDM (LC) - 1470NM up to 40 km
1-PORT SFP 1000BASE-CWDM (LC) - 1490NM up to 40 km
VSP 7000 installation
SFP+ device
SFP device
Small form factor pluggable transceivers
Order code
AA1403013–E6
AA1403011–E6
AA1403017–E6
AA1403018–E6
AA1403020–E6
AA1403019–E6
Order code
AA1419025-E5
AA1419026-E5
July 2013 59