Fantasea Line FG7X II A M16 Instruction Manual page 7

Numbered descriptions below refer to corresponding numbers on the top housing graphic (previous page):
1. Zoom Control – Turning this control activates the camera zoom button.
a. In Shooting Mode –
i. Turn the zoom control clockwise to zoom out, increasing the area visible in the frame.
ii. Turn the zoom control counterclockwise to zoom in, so that the subject fills a larger
b. In Playback Mode - use the zoom control as an index or playback lever.
2. Shutter Release – Activates the camera shutter release button and auto focus prior to taking the
picture.
3. On/Off - Pushing this control activates the camera power switch button and turns the camera on/off.
4. Mode Dial – Turn this dial to change shooting modes.
Important Notice! It is recommended to align housing and camera mode dials prior to installing the
camera inside the housing. Please refer to the section "Installing the Camera" for more information.
5. Exposure Compensation Dial - Rotating this knob operates the camera's Exposure Compensation Dial
to the opposite direction.
a. In order to set a higher exposure compensation value, rotate the exposure compensation dial
clockwise.
b. In order to set a lower exposure compensation value, rotate the exposure compensation dial
counterclockwise.
6. Cold-Shoe Mount for Lighting Accessories- Enables mounting a flash, video light, torch or focus light
on top of the housing by using a dedicated connector. For further information regarding such
connectors, please visit the Fantasea website –
area of the frame and for close-up and macro images to be taken.
www.fantasea.com
FG7X II A M16 Housing Instruction Manual 20191218
7