Advertisement
Command
l2filter trace
Ethernet Device ~
ethernet filter
Fluorine Driver ~
fluorine address>
fluorine readr>
fluorine writer> <value>
Chips:
Command
Cpu
Debug
Exit
Info
Mem
Stack
rbrb <addr>
rh <addr>
rw <addr>
tell <process> <string>
wb <addr> <val>
wh <addr> <val>
ww <addr> <val>
Config:
Command
list
print [low | medium | high] [<module>]
reset [<module>]
save
resource [<process> [<resource> [<value>]]]
default
version
2002/9/13
- on/off trace
- Show NP filter table
- Select MII address to read/write
- Read MII register
- Read MII register
- print percentage of cpu cycles used
- enter debug process
- abort from ATMos
- print out version information and machine's address
- memory used on a process-by-process basis
- stack usage on a process-by-process basis
- read byte at address <addr>
- read halfword at address <addr>
- read word at address <addr>
- send string to process using TELL message
- write byte <val> at address <addr>
- write halfword <val> at address <addr>
- write word <val> at address <addr>
- List all modules registered
- Print configuration
- Reset configuration to default
- Save configuration
- Control resources
- restore factory default settings
- Display version information
7/18
Description
Description
Description
Advertisement
