Advertisement
Command
relay all | <i/f name> [<i/f name>] [forward]
rip syntax ~
rip <sub cmd>
rip help
role syntax ~
role <1-7>
route syntax ~
route add <dom name> a.b.c.d <relay>
[am:bm:cm:dm [<cost> [<timeout s>]]]
route delete <dom name>
route flush
routes syntax ~
routes
snmp syntax ~
snmp <sub cmd>
snmp help
stats syntax ~
stats <sub cmd>
stats help
subnet syntax ~
subnet add <net name> <i/f name> a.b.c.d
am:bm:cm:dm
subnet delete <net name>
subnet flush
version syntax ~
version
2002/9/13
- allow relaying between i/fs
- execute rip subcommand
- list subcommands available
1 - Router with PPPoE
2 - Router with PPPoA
3 - Router with R1483
4 - Router with IPoA
5 - Bridge with PPPoA
6 - Bridge with R1483
7 - Router with Bridged R1483
- define/edit an IP forwarding route
- delete a route
- delete all routes
- show IP forwarding routes
- execute snmp subcommand
- list subcommands available
- execute stats subcommand
- list subcommands available
- create subnet definition
- remove subnet definition
- remove all subnet definitions
- display software version no.
12/18
Description
Advertisement
