Advertisement
Command
device flush
disable syntax ~
disable [<i/f>]
enable syntax ~
enable [<i/f> [mtu <size>] [<IPaddr>]]
ipatm syntax ~
ipatm <cmd>
ipatm help
nat syntax ~
nat add <i/f>
nat delete <i/f>
norelay syntax ~
norelay [all | <i/f name> [<i/f name>] [forward]] - disallow relaying between i/fs
pfno syntax ~
pfno syntax
ping syntax ~
ping <host> [<ttl> [<size>]]
profile syntax ~
profile add <no(1-8)> <name> <vpi> <vci>
<role(1-6)> <encap> <usrname> <password>
<auth(1-2)> <idle> <ondemand> <ip> <mask>
<gw>
profile delete <no(1-8)>
profile flush
relay syntax ~
relay
2002/9/13
- remove all interface definitions
- prevent use of interfaces or just interface <i/f>
- enable use of all interfaces or interface <i/f> if given
- set <i/f> IP address to <IPaddr>
- set MTU for interface
- execute ipatm subcommand
- list subcommands available
- install NAT on interface
- uninstall NAT from interface
- request echo from <host>
- create or modify profile definition
- <role> -- 1:rpppoe 2:rpppoa 3:rr1483 4:ripoa 5:bpppoa
6:br1483
- <encap> -- 1:LLC 2:VCmux 3:Auto
- <auth> -- 1:chap 2:pap
- e.g. profile add 1 isp1 0 35 1 1 user password 1 0 1 192.168.1.1
255.255.255.0 192.168.1.254
- default profile values-- 1(~8) null 0 0 6 1 ppp: user password 1
0 1 wan: 0.0.0.0 0.0.0.0 0.0.0.0
- reset profile <no> content to default values
- reset all profile to default values
- list existing relays in place
11/18
Description
Advertisement
