Cleaning The Dust Bin And The Filters - Blaupunkt XEASY User Manual

7.2

Cleaning the dust bin and the filters

To clean the dust bin and the filters, do the
following:
1. Make sure the power switch is off.
2. Press on the release button and pull the
dust bin out of the robot.
3. Open the dust bin.
4. Take out the primary filter.
5. Take out the HEPA filter.
6. Empty the dust bin.
7. Wash the dust bin and primary filter with
water and clean the HEPA filter with a
brush. Let the primary filter air dry.
1 CAUTION
Do not dry the primary filter and HEPA filter in
direct sunlight.
8. Place the primary filter and HEPA filter in
the dust bin. Make sure the primary filter is
fully dry.
9. Place the dust bin in the robot.
EN
53