Blaupunkt XEASY User Manual page 46

Figure 13 - Add device Figure 14 - Binding the robot
5. Make sure the robot is in Standby mode. (Press the Start/Stop button if
the robot is currently cleaning or switched off )
6. Press and hold the START/STOP button on the robot for three seconds.
The robot's WiFi is activated and the button light flashes blue.
7. Tap "Reset" in the app.
The app continues to the "Config family Wifi" screen and displays the
WiFi network that your mobile phone connects to.
8. Type the WiFi password of the displayed WiFi network and tap "Next".
9. Hold your mobile phone close to the robot.
46
10. Tap "Connect Robot's Wifi". The app switches to the WiFi selection
screen of your mobile phone.
11. Select the "blaupunkt_BB.." from the list of available WiFi networks. Wait
until your mobile phone successfully connects.
12. Return to the app. The popup "Binding the Robot, please wait..." is
displayed, see Figure 14.
13. Wait until the popup disappears and the Bluebot Robotics appears in
the app. The button light on the robot is on continuously.
Your robot is now connected to the Bluebot Robotics app and logged into
the cloud server successfully. You are able to operate your robot through
the app. For more information see sections 5.2 and 6.2.
If you failed to connect, the button light will flash in red color for four
times. Please try the following solutions:
1. Make sure that your home WiFi is working correctly and your phone is
connected to it.
2. Switch off the robot, wait for 5 minutes and try to add the robot again.
3. Position the robot closer to the WiFi router in your home and try to add
the robot again.
4. When connected to the "blaupunkt_BB.." WiFi your phone may ask
to switch to another WiFi network because the "blaupunkt_BB.." WiFi
cannot access the internet. Make sure to choose to stay connected to
the "blaupunkt_BB.." WiFi.