Advertisement
Quick Links
Advertisement
Related Manuals for Blaupunkt XSMART
Summary of Contents for Blaupunkt XSMART
- Page 1 APP INSTRUCTION XSMART...
- Page 2 INDEX PREPARING THE ROBOT WIFI SETTINGS APP : INSTALLATION ACTIVATE THE ROBOT APP : REGISTRATION APP : ADDING THE ROBOT Need help?
-
Page 3: Preparing The Robot
PREPARING THE ROBOT Make sure the robot is fully charged, before using it for Remove the robot from the docking station (charger). the first time. Usually around 8 to 10 hours of charging would be enough. Need help? - Page 4 PREPARING THE ROBOT Place the robot close to your router. Make sure the on/off switch is set to ‘on’ . This is the switch on the side of the robot. Wait until the robot has started fully. It is not possible to register the robot in the app while it is physically in the docking station Need help?
-
Page 5: App : Installation
APP : INSTALLATION Make sure your phone is connected to the Wi-Fi network. Download the app for your specific robot. (BluebotXS PLUS app) Please note that the XEasy robot only works on a frequency of 2.4 GHz. Need help? - Page 6 APP : REGISTRATION Open the app and register yourself; select ‘Europe’ Fill in an email address and password of choice and your area and tap ‘Go to App’ ‘Register’ Welcome E-mail Password Confirm password Zone Europe Register Go to App Need help?
- Page 7 APP : ADDING THE ROBOT Click the ‘+’ to add the robot. IF ASKED: Select the robot model you have (bluebotXS) Select Model BluebotXP+ BluebotXE Need help?
- Page 8 APP : ADDING THE ROBOT On the App confirm that the reset was successful. Press and hold the EDGE CLEAN button on the top of your device until the display shows: CONN Reset successful Need help?
-
Page 9: App : Wifi Settings
APP : WIFI SETTINGS Select your Wi-Fi signal. Enter your password for Wi-Fi Press the ‘home’ button on your phone and go to the connection and tap next. Wi-Fi settings. Select the network that begins with blaupunkt_ ; Network configuration and return to the app. - Page 10 APP : ACTIVATE THE ROBOT The App will now connect to the robot. If you have been successful, your robot will now be displayed in the app. Hold the telephone in close proximity to the Tap on the robot in your app and you will be able to start robot.
Need help?
Do you have a question about the XSMART and is the answer not in the manual?
Questions and answers