Table of Contents
Advertisement
INSTALLATION PLACE
10
Indoor unit installation place
- The place shall easily bear a load exceeding four times the indoor unit's weight.
- The place shall be able to inspect the unit.
- The place where the unit shall be leveled.
- The place shall allow easy water drainage.
- The place shall easily connect with the outdoor unit.
- The place where the unit is not affected by an electrical noise.
- The place where air circulation in the room will be good .
- There should not be any heat source or steam near the unit
Top view
(unit: mm)
Inspection hole
(600 x 600)
Control box
Air Intake
Air Outlet
Front
* Suitable dimension "H" is necessary to get a slope to drain.
Front view
(unit: mm)
H=200 or more
Advertisement
Table of Contents
