The Indoor Unit Installation; Position Of Suspension Bolt - LG UTN48R Owners & Installation Manual

THE INDOOR UNIT INSTALLATION

Position of Suspension Bolt

- Select and mark the position for fixing bolts and
piping hole.
- Decide the position for fixing bolts slightly tilted to
the drain direction after considering the direction
of drain hose.
- Drill the hole for anchor bolt on the wall.
CAUTION
!
• This air-conditioner uses a drain pump.
• Install the unit horizontally using a level
gauge.
• During the installation, care should be
taken not to damage electric wires.
NOTE
Avoid the following installation location.
1
Such places as restaurants and kitchen where
considerable amount of oil steam and flour is
generated. These may cause heat exchange
efficiency reduction, or water drops, drain
pump mal-function. In these cases, take the
following actions;
- Make sure that ventilation fan is enough to
cover all noxious gases from this place.
- Ensure enough distance from the cooking
room to install the air conditioner in such a
place where it may not suck oily steam.
Air conditioner
Take enough
distance
Use the ventilation fan for smoke-collecting
hood with sufficient capacity.
2
Avoid installing air conditioner in such places
where cooking oil or iron powder is generated.
3
Avoid places where inflammable gas is
generated.
4
Avoid place where noxious gas is generated.
5
Avoid places near high frequency generators.
Ceiling Cassette Type
Cooking table
THE INDOOR UNIT INSTALLATION
Ceiling
[TM/TN/TP Chassis]
875(Ceiling opening)
787
840
Panel size : 950 X 950 mm
[TQ/TR Chassis]
(Unit : mm)
585~660(Ceiling opening)
517
570
461
Panel size : 700 X 700 mm
600(Ceiling opening)
517
570
461
Panel size : 620 X 620 mm
15
Level gauge
Ceiling board
(Unit : mm)
Unit:mm
Unit:mm