Wood Stone MOUNTAIN Series Installation And Operation Manual
  1. Manuals
  2. Brands
  3. Wood Stone Manuals
  4. Oven
  5. MOUNTAIN Series
  6. Installation and operation manual

Wood Stone MOUNTAIN Series Installation And Operation Manual

Stone hearth oven
Hide thumbs Also See for MOUNTAIN Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Installation and
Operation Manual
MOUNTAIN SERIES - CE
Stone Hearth Oven
Gas-Fired, Gas/Wood Combination,
European Models
MT. CHUCKANUT WS-4-(RFG, RFG-IR, IR)-(W)-CE
MT. ADAMS WS-MS-5-(RFG, RFG-IR, IR)-(W)-CE
MT. BAKER WS-MS-6-(RFG, RFG-IR, IR)-(W)-CE
MT. RAINIER WS-MS-7-(RFG, RFG-IR, IR)-(W)-CE
WOOD STONE CORPORATION
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
www.woodstone-corp.com
Tel +1.360.650.1111
Fax +1.360.650.1166
DOC NO M0037.09
REVISED SEPTEMBER 2019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MOUNTAIN Series and is the answer not in the manual?

Questions and answers

Related Manuals for Wood Stone MOUNTAIN Series

Summary of Contents for Wood Stone MOUNTAIN Series

  • Page 1 Installation and Operation Manual MOUNTAIN SERIES - CE Stone Hearth Oven Gas-Fired, Gas/Wood Combination, European Models MT. CHUCKANUT WS-4-(RFG, RFG-IR, IR)-(W)-CE MT. ADAMS WS-MS-5-(RFG, RFG-IR, IR)-(W)-CE MT. BAKER WS-MS-6-(RFG, RFG-IR, IR)-(W)-CE MT. RAINIER WS-MS-7-(RFG, RFG-IR, IR)-(W)-CE WOOD STONE CORPORATION 1801 W. Bakerview Rd.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Mountain Series CE � � � � � � � � � � � � � � � 3 Cautions & Warnings � � � � � � � � � � � � � � 4 Unloading &...

  • Page 3: Mountain Series Ce

    MOUNTAIN SERIES CE Mountain Series CE Installation and Operation Manual INSTALLATION AND OPERATION MANUAL FOR THE WOOD STONE MOUNTAIN SERIES ORIGINAL INSTRUCTIONS WS-MS-(4, 5, 6, 7)-RFG-(IR)-(W)-CE-(NG, LP) STONE HEARTH COOKING EQUIPMENT CE MODEL GAS-FIRED & GAS/WOOD COMBINATION MODELS NATURAL GAS OR LIQUID PROPANE FUELED ADDITIONAL COPIES AVAILABLE UPON REQUEST This appliance is for professional use by qualified personnel.

  • Page 4: Cautions & Warnings

    CAUTIONS & WARNINGS Mountain Series CE Installation and Operation Manual WOOD STONE MOUNTAIN SERIES CE GAS-FIRED OVEN OPERATING INSTRUCTIONS DO NOT THROW THIS MANUAL AWAY RETAIN THIS MANUAL FOR FUTURE REFERENCE Additional copies of this manual at woodstone-corp�com� For prompt responses to service/maintenance questions, call your distributor�...

  • Page 5: Unloading & Moving The Oven

    USING A CRANE. The oven arrives with four lifting eyes attached� When craning a Wood Stone oven, use a spreader bar with a two-legged sling rigged on each end� The spreader bar should be of a sufficient length to keep the sling from contacting the oven�...

  • Page 6: Installation Clearances

    Installation and Operation Manual CLEARANCES 1. The Wood Stone Mountain Series oven must have a minimum 25 mm (1") clearance to combustibles from all sides, and 152mm (6") clearance to combustibles from the top (see INSTALLATION CLEARANCES section on next page)� If building a facade that will contact the oven, use completely non-combustible materials*�...
  • Page 7 IMPORTANT NOTE: If enclosing the oven in a facade, you must leave an access panel to allow for service of the thermocouple beneath the oven. Wood Stone’s oven mounted wood box has an access panel built in. If using an exhaust hood over the oven, make sure your facade allows for the proper access for removal of the hood filters.

  • Page 8: Assembly

    ASSEMBLY ASSEMBLY INSTRUCTIONS Mountain Series CE Installation and Operation Manual 1. Mount the oven mantle (if provided) using the hardware provided� Please refer to the MANTLE MOUNTING section� 2. Mount the stainless steel Toe Kick to the front of the oven stand, angle side down using the large self tapping screws� The holes are pre-drilled in the stand�...

  • Page 9: Mantle Mounting

    MANTLE MOUNTING Mountain Series CE Installation and Operation Manual The initial steps are the same for mounting either a stainless mantle or a bracket for a granite mantle� 1. Begin by installing the threaded studs into the clip nuts below the oven doorway (3 or 4 turns is sufficient)�...

  • Page 10: Front Panel Assembly

    FRONT PANEL ASSEMBLY FRONT PANEL ASSEMBLY Mountain Series CE Installation and Operation Manual STANDARD FRONT PANEL AND TOE KICK ASSEMBLY INSTRUCTIONS Flame Height Control Knob Controller Service Panel Transformer Box Contains terminal strip for incoming power supply. NOTE: Have licensed electrician make this electrical connection A Hex-head self-tapping screw�...

  • Page 11: Extension Panel Assembly

    EXTENSION PANEL ASSEMBLY Mountain Series CE Installation and Operation Manual OPTIONAL LOWER EXTENSION, THROTTLE ROD AND CONTROLLER ASSEMBLY INSTRUCTIONS After the oven has been leveled, remove the Remove the Front Access Attach the Controller Extension Panel Throttle Assembly which Panel�...
  • Page 12 EXTENSION PANEL ASSEMBLY Mountain Series CE Installation and Operation Manual OPTIONAL LOWER EXTENSION, THROTTLE ROD AND CONTROLLER ASSEMBLY INSTRUCTIONS Pass the Throttle Rod through the Throttle Bracket (already attached)� Position the Pointer in approximately the 2 o’clock position� Slide the Clamp on the EMT over the end of the Throttle Rod/Knob assembly and attach the Throttle Rod to the EMT Throttle Rod Extension using the compression Clamp (5/16"...

  • Page 13: Stucco Application

    STUCCO APPLICATION Mountain Series CE Installation and Operation Manual This figure depicts the application of stucco on a Wood Stone oven� Use no less than 25 mm (1") of stucco coating to cover all exposed metal lathing on the oven�...

  • Page 14: Utilities

    UTILITIES Mountain Series CE Installation and Operation Manual ELECTRICAL The oven is rated at 230 VAC, 2 A, 50 Hz� The rating also appears on the data plate� It is recommended that the oven be connected to its own individual branch circuit� Electrical diagrams are located on the Junction Box and also at the end of this manual�...
  • Page 15 Wood Stone recommends that the oven be equipped with a manual, individual shutoff valve, located between the oven and the main gas supply, and that this shutoff valve (supplied by others) be left readily accessible� Wood Stone also recommends that inspection and maintenance of the burners and gas piping connections of this appliance be performed at regularly scheduled intervals and only by professional gas appliance service agencies�...

  • Page 16: Gas Specifications

    GAS SPECIFICATIONS Mountain Series CE Installation and Operation Manual NATURAL GAS (NG) Gas Supply and Pressure MOUNTAIN SERIES MODELS EN 437 Gas Group 2ELL Inlet Pressure (mbar) 20/25 Declared Input (kW) 2ELL MS-4-RFG-CE-NG 17�5 MS-4-RFG-IR-CE-NG 33�7 33�7 33�7 33�7 29�5 MS-5-RFG-CE-NG 30�8...
  • Page 17 GAS SPECIFICATIONS Mountain Series CE Installation and Operation Manual PROPANE (LP) Gas Supply and Pressure MOUNTAIN SERIES MODELS EN 437 Gas Group 3B/P 3B/P Inlet Pressure (mbar) 28-30/37/50* 30/37* 30/37/50* Declared Input (kW) 3B/P 3B/P MS-4-RFG-CE-LP 17�6 23�5 23�5 17�6 MS-4-RFG-IR-CE-LP 29�9...

  • Page 18: Venting

    The above statement taking precedence, Wood Stone Corporation recommends the following two venting options: 1. This Wood Stone Mountain Series oven can be vented as a Type A appliance (with no flue connection), designed to be installed under an exhaust hood (canopy)� The hood must be connected to a grease-rated duct system� The venting system must be designed and installed in accordance with all relevant codes pertaining to grease and smoke producing commercial cooking appliances�...

  • Page 19: Flue Adapter, Ms-5, 6, 7

    Mountain Series CE Installation and Operation Manual MOUNTAIN SERIES MS-5, MS-6 & MS-7 OVENS: FLUE ADAPTER INSTALLATION The flue adapter unit is designed to facilitate connection to a round duct� Use the stainless steel screws and sealant provided to attach the flue adapter to the exhaust outlet on the oven if it is not already installed�...

  • Page 20: Flue Adapter, Ms-4

    Mountain Series CE Installation and Operation Manual MOUNTAIN SERIES MS-4 OVENS: FLUE ADAPTER INSTALLATION The flue adapter unit is designed to facilitate connection to a round duct� Use the provided stainless steel screws and sealant provided to attach the flue adapter to the exhaust outlet on the oven (203mm (8") I�D�) Note: If using a Selkirk or other modular-type duct, attach according to the manufacturer’s instructions�...

  • Page 21: Venting Do's & Don'ts

    Most Wood Stone Mountain Series ovens are built into some sort of wall structure or enclosure� This creates the potential for different venting scenarios that can be detrimental to the operation and performance of the oven burners� Here are some basic rules that to follow that will ensure a properly functioning oven installation�...
  • Page 22 VENTING DO’S & DON’TS Mountain Series CE Installation and Operation Manual DIRECT CONNECT VENTING EXAMPLES Example 1 shows a proper installation� The enclosure around the oven is completely sealed so that the only air entering the space Equal air pressure inside and...
  • Page 23 VENTING DO’S & DON’TS Mountain Series CE Installation and Operation Manual DIRECT CONNECT VENTING EXAMPLES Example 3 shows an incorrect installation where an additional vent was added to the wall behind the oven, Equal air pressure creating an air pressure...
  • Page 24 VENTING DO’S & DON’TS Mountain Series CE Installation and Operation Manual DIRECT CONNECT VENTING EXAMPLES Example 5 shows a correct installation where a ceiling Low pressure area Air flow has been added to the enclosure surrounding the oven to correct an improper installation�...
  • Page 25 Listed Type 1 hood� Also refer to the OVEN VENTING section earlier in this manual� PROPER MOUNTING POSITION FOR THE WOOD STONE HOOD 1. Center the hood from side to side on the oven (A)� Note that in an MS-5, 6 or 7 model, the oven may have the round flue adapter attached�...
  • Page 26 VENTING DO’S & DON’TS Mountain Series CE Installation and Operation Manual HOOD INSTALLATION WITH DECORATIVE FACADE WALL/OVEN ENCLOSURE For installations where a hood is being used with a decorative facade wall or oven enclosure, it will be necessary to both seal the gap between the facade wall and the top of the oven, and the gaps at the sides of the hood between the facade wall and the front of the oven�...
  • Page 27 VENTING DO’S & DON’TS Mountain Series CE Installation and Operation Manual Incorrect installation. No flashing has been installed so air being pulled up the sides of the oven from beneath� Unacceptable venting Exhaust stack Stud wall Side view of properly installed hood...
  • Page 28 All installations subject to the approval of the local authority having jurisdiction. Wood Stone recommends you submit your venting plans in advance to your local authority for approval. M0037.09 SEPTEMBER 2019...

  • Page 29: Controller (Rfg-Ir)

    CONTROLLER (RFG-IR) RFG-IR OVEN CONTROLLER Mountain Series CE Installation and Operation Manual RFG-IR / W-IR TYPE 2 CONTROLLER FUNCTIONS Hearth Heat Indicator Light Dome Flame Indicates that the pilot for the Indicator Light Underfloor IR burner is lit� This Power Indicator Light...

  • Page 30: Controller (Rfg)

    CONTROLLER (RFG) Mountain Series CE Installation and Operation Manual RFG TYPE 4 CONTROLLER FUNCTIONS Temperature units Press and hold to Hearth Temperature switch between The hearth (floor) Fahrenheit temperature will and Celsius� be displayed when the oven is turned ON/OFF button on�...

  • Page 31: Flame Height Control

    FLAME HEIGHT CONTROL Mountain Series CE Installation and Operation Manual DETERMINING THE APPROPRIATE FLAME HEIGHT For each specific configuration of oven there is a system that determines what the desired flame height will be� Each flame height corresponds to a saturated floor temperature� Several factors need to be accounted for in order to determine this relationship for each oven�...

  • Page 32: General Maintenance

    OVEN INTERIOR Wood Stone recommends the use of long-handled brushes for sweeping up surface debris that will accumulate on the floor of the oven during use� Use a natural fiber brush—always brushing away from the radiant burner well� For deeper cleaning, use a brass bristled brush�...

  • Page 33: Rfg-Ir-(W) Initial Start-Up

    Installation and Operation Manual INITIAL RFG-IR-(W) OVEN START-UP PROCEDURE Wood Stone recommends completing this start-up procedure before burning any wood� Models Listed for wood burning will have a “-W” in the model number� IMPORTANT: If at any time you feel that either or both of the burners are not operating properly, turn the oven off and call for service�...

  • Page 34: Rfg-Ir-(W) Operation

    RFG-IR-(W) OPERATION Mountain Series CE Installation and Operation Manual DAILY OPERATION FOR RFG-IR-(W) MODELS IMPORTANT: If at any time you feel that the burner is not operating properly, TURN THE OVEN OFF and call for service� Before servicing, disconnect the electrical supply at the breaker and turn off the gas supply at the appliance’s individual gas shutoff valve�...

  • Page 35: Rfg-(W) Initial Start-Up

    Installation and Operation Manual INITIAL RFG-(W) OVEN START-UP PROCEDURE Wood Stone recommends completing this start-up procedure before burning any wood� Models Listed for wood burning will have a “-W” in the model number� IMPORTANT: If at any time you feel that either or both of the burners are not operating properly, turn the oven off and call for service�...

  • Page 36: Rfg-(W) Operation

    RFG-(W) OPERATION Mountain Series CE Installation and Operation Manual DAILY OPERATION FOR RFG-(W) MODELS IMPORTANT: If at any time you feel that the burner is not operating properly, TURN THE OVEN OFF and call for service� Before servicing, disconnect the electrical supply at the breaker and turn off the gas supply at the appliance’s individual gas shutoff valve�...

  • Page 37: W-Ir Initial Start-Up

    Never use any type of flammable liquid or fuel to start a fire in a Wood Stone oven. Doing so could cause a dangerous situation and/or damage to the oven ceramic.

  • Page 38: W-Ir Daily Operation

    W-IR DAILY OPERATION Mountain Series CE Installation and Operation Manual IMPORTANT NOTES • One pound of properly cured, heavy, hard wood produces the potential of 1�9 kW (6,500 BTU/hr�) • The temperature sensor (thermocouple) is located one inch under the surface, approximately 305 mm (1 ft�) back from the center of the oven�...

  • Page 39: Burning Wood Safely

    The exhaust system must be inspected and cleaned per the manufacturer’s and or local code official’s recommendations� Wood Stone recommends cleaning and inspection at least monthly on any ventilation system serving solid fuel equipment.

  • Page 40: Managing The Oven Fire

    MANAGING THE OVEN FIRE Mountain Series CE Installation and Operation Manual STARTING THE FIRE Build a small kindling fire of 2�25–3 kg (5–7 lbs) of heavy, hardwood� We suggest using a fire starter (paraffin/sawdust stick) to start the fire� Begin with (3) small pieces of wood (about 25–76 mm (1–3") diameter and 356–406 mm (14–16") in length)� The fire should be located on side of the oven chamber opposite the radiant gas burner�...

  • Page 41: Operational Sequence

    OPERATIONAL SEQUENCE PERIODIC THERMAL CLEANING Mountain Series CE Installation and Operation Manual RFG-(W) CE OVEN BURNER OPERATION SEQUENCE W-IR CE OVEN BURNER OPERATION SEQUENCE Power ON� Power ON� Floor temperature Floor temperature below ICS2 Module powers Igniter above Hearth Set Point Hearth Set Point –...

  • Page 42: Electrical Diagrams

    ELECTRICAL DIAGRAMS Mountain Series CE Installation and Operation Manual RFG-IR-(W) CE (TYPE 2 CONTROLLER)                          ...
  • Page 43 ELECTRICAL DIAGRAMS Mountain Series CE Installation and Operation Manual RFG-(W)-CE WITH TYPE 2 CONTROLLER                          ...
  • Page 44 Blank page M0037.09 SEPTEMBER 2019...
  • Page 45 Blank page M0037.09 SEPTEMBER 2019...
  • Page 46 Blank page M0037.09 SEPTEMBER 2019...

  • Page 47: Limited Warranty

    In the event of warranty claim or otherwise, the sole obligation of Wood Stone shall be the repair and/or replacement, at the option of Wood Stone, of the appliance or component or part thereof� Such repair or replacement shall be at the expense of Wood Stone with the exception of travel over 100 miles or two hours, overtime, and holiday charges which shall be at the expense of the purchaser�...
  • Page 48 WOOD STONE CORPORATION 1801 W. Bakerview Rd. Tel 360.650.1111 Bellingham, WA 98226 USA Fax 360.650.1166 www.woodstone-corp.com An ongoing program of product improvement may require us to change specifications without notice. M0037.09 SEPTEMBER 2019...

This manual is also suitable for:

Mt. chuckanutMt. adamsMt. bakerMt. rainier

Table of Contents