Yardline OAKRIDGE 8 x 12 Assembly Manual page 64

PARTS REQUIRED:
x1 OO
1-1/4 x 2-1/2 x 69" (3,2 x 6,3 x 175,3 cm)
Attach temporary support OO as a ledger board flush under wall
4
panels for doors to rest on, using three 3" screws (Fig. A) .
5 Center doors on panel seam as shown (Fig. B) .
Check ledger board is still flush under panels.
Screw hinge boards into wall supports and floor using ten 3" screws as shown.
6
Make sure screws go into framing and floor (Fig. C, D) .
Remove temporary supports and check doors open properly.
7
FINISH
You have finished installing your doors.
8
Fig. C
Angle 3" (7,6 cm)
Fig. D
Flush
against wall panels.
Fig. A
OO
Screw
DOORS
x13
62
3" (7,6 cm)
OO
SEAM
Fig. B
3/8"
(1 cm)
3" (7,6 cm)
Screws into the wall
support and floor frame.