Haworth BELONG Installation Instructions
Multi material territory screen
Hide thumbs
Also See for BELONG:
- Assembly instructions manual (9 pages) ,
- Installation instructions manual (7 pages) ,
- Assembly instructions (5 pages)
Advertisement
Quick Links
Tools Required
IS OP RO PY L
AL CO HO L
3/32"
Allen Wrench
CAUTION
IF REUSING RETAINER (H)
MAKE SURE THE MARKED
SIDE IS FACING AWAY
FROM THE GLASS.
CAN CAUSE FAILURE OF
NOTE: Wipe mounting surface area
1
1
with Isopropyl Alcohol to ensure
area cleaned and achieve full bond.
G
CUSTOMER SERVICE PHONE: 1-800-426-8562
Multi Material Territory Screen
Isopropyl
Alcohol
FOR
FOR
FABRIC
SOLID
GLASS SCREENS
A1
2
3
1
E.C.O. No:
420-126
BELONG®
Installation Instructions
Nut Plate
Assembly
D
T M
R E
D
A S
P E
T E M
G O
LO
H
H
Retainer
G
Double Sided Tape
CAUTION: TAPE (G) IS VERY
AGGRESSIVE. DETERMINE
FINAL POSITION OF SCREEN
BEFORE ADHERING TO
WORKSURFACE. ALLOW 72
HOURS TO FULLY CURE.
IS OP RO PY L
AL CO HO L
1 of 4
Page:
0
A
Screen
Screen
B
Tape Strip
E
Cover
F
Base
4
A1
Part No:
7029-9923
1/2
1
1/4
1/4
Scale 1 : 1
C
End Cap
Foam Tape
D1
Rev:
2
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Haworth BELONG
Summary of Contents for Haworth BELONG
- Page 1 BELONG® Multi Material Territory Screen Installation Instructions Scale 1 : 1 Tools Required Isopropyl Nut Plate IS OP RO PY L Assembly Alcohol AL CO HO L 3/32" Allen Wrench Screen FABRIC SOLID Screen Tape Strip End Cap Foam Tape...
- Page 2 Use tape (B1) to mark location Install Screen Tape Strip (B) NOTE: Locate tape (B1) centering with each tab shown on base (F1). T E M REMOVE TAPE (B1) ONCE TAPE STRIPS (B) ARE INSTALLED! 0.0” 0.01” NOTE: Center screen tape strips (B) with center of tape (B1) and apply flush T E M NOTE: Tempered...
- Page 3 Install screen (A) NOTE: Make sure retainer (H) is in between screen and set screws of nut plate (D). WARNING! WARNING! TIGHTEN FIRMLY OR UNTIL ALLEN WRENCH FLEXS. (NOT TO EXCEED 15in lbs) PLUMB SCREEN (A) SNUG ALL SET SCREWS (No Gaps) 0.0"...
- Page 4 HINT: Make sure the screen (A) is aligned, plumb, and centered BEFORE installing covers (E). CUSTOMER SERVICE PHONE: 1-800-426-8562 E.C.O. No: 420-126 4 of 4 Rev: Page: 7029-9923 Part No:...
Need help?
Do you have a question about the BELONG and is the answer not in the manual?
Questions and answers