Setting Grid Parameters - Huawei SUN2000-175KTL-H0 User Manual

SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1)
User Manual

7.2.2.1 Setting Grid Parameters

Procedure
Step 1 Choose Function Menu > Settings > Grid Parameters to go to the parameter setting screen.
Figure 7-5 Power grid parameters (special user)
----End
Parameters
No. Parameter
1 Grid code
2 Auto start upon grid recovery
Grid connection duration after power
3
grid recovery
4 Grid reconnection voltage upper limit
Issue 02 (2019-06-05)
Vn represents the rated voltage and Fn represents the rated frequency.
Copyright © Huawei Technologies Co., Ltd.
Description
Set this parameter based on the grid code of the
country or region where the SUN2000 is used and
the SUN2000 application scenario.
Specifies whether to allow the SUN2000 to
automatically start after the power grid recovers.
Specifies the waiting time for SUN2000 restart
after the power grid recovers.
The standards of certain countries and regions
require that the SUN2000 must not export power to
the power grid again when the grid voltage exceeds
the value of Grid reconnection voltage upper
limit after the SUN2000 shuts down due to a fault.
7 Man-Machine Interactions
58