Huawei SUN2000-175KTL-H0 User Manual page 49

SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1)
User Manual
If you perform
inverter can start normally after the fault is automatically cleared.
Step 2 Turn the DC switches at the bottom of the inverter to ON.
Step 3 Connect a mobile phone that runs the SUN2000 app to the inverter using a Bluetooth module,
a WLAN module, or a USB data cable.
When iOS is used, the SUN2000 app does not support connection over a USB data cable.
Figure 6-1 Connection mode
Issue 02 (2019-06-05)
Step 2 before
 Purchase a Bluetooth module or a WLAN module bundled with the inverter. A Bluetooth module or
a WLAN module purchased from any other source may not support communication between the
inverter and the SUN2000 app.
 Use the USB data cable delivered with the mobile phone. The port type is USB 2.0.
Copyright © Huawei Technologies Co., Ltd.
Step 1, the inverter reports a fault about abnormal shutdown. The
6 System Commissioning
43