Huawei SUN2000-175KTL-H0 User Manual page 60

SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1)
User Manual
Figure 7-4 Feature parameters (advanced user)
----End
Parameters
No. Parameter
1 MPPT multi-peak
scanning
2 MPPT multi-peak
scanning interval
3 RCD enhancing
Issue 02 (2019-06-05)
Description
When the SUN2000 is used in
scenarios where PV strings are
obviously shaded, enable this
function. Then the SUN2000 will
perform MPPT scanning at regular
intervals to locate the maximum
power.
Specifies the MPPT multi-peak
scanning interval.
RCD refers to the residual current of
the SUN2000 to the ground. To
ensure device security and personal
safety, RCD should comply with the
standard. If an AC switch with a
residual current detection function is
installed outside the SUN2000, this
function should be enabled to reduce
the residual current generated during
SUN2000 running, thereby
preventing the AC switch from
misoperations.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
Remarks
The scanning interval is set by
MPPT multi-peak scanning
interval.
This parameter is displayed only
when MPPT multi-peak scanning
is set to Enable.
-
54