Setting Parameters; Setting Grid Parameters - Huawei SUN2000 Series User Manual

SUN2000-(100KTL, 110KTL, 115KTL)-M2
User Manual

7.1.4 Setting Parameters

7.1.4.1 Setting Grid Parameters

Choose Settings > Grid parameters to set grid parameters.
No. Parameter
1 Grid Code
2 Isolation
3 Output mode
4 Auto start upon grid
recovery
5 Grid connection delay
after grid recovery (s)
Issue 02 (2022-06-30)
Figure 7-6 Login
Description
Set this parameter based on the grid code of the country or
region where the inverter is used and the inverter application
scenario.
Set the working mode of the inverter based on the grounding
status at DC side and the connection to the power grid.
Specifies whether the inverter output has a neutral wire based
on the application scenario.
Specifies whether to allow the inverter to automatically start
after the power grid recovers.
Specifies the time after which the inverter begins restarting
after the power grid recovers.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
70