Tuning Into A Station; Setting The Sensitivity Of The Station Search Mode; Storing Stations - Blaupunkt Bologna C52 Operating Instructions Manual

RADIO MODE

Tuning into a station

There are various methods available for
tuning into a station.
Automatic station search mode
Press the or
The unit tunes into the next receivable
station.
Tuning into stations manually
You can also tune into stations manual-
ly.
Press either the
Note:
You can only tune into stations
manually if the RDS function has
first been deactivated.
Browsing through broadcasting
networks (only FM)
If a radio station provides several pro-
grammes, you have the option of brows-
ing through its so-called "broadcasting
network".
Press the or
move to the next station on the
broadcasting network.
Note:
If you want to use this feature, the
RDS function must first be activat-
ed.
You will then only be able to switch to
stations that you have received once
already. To do so, use the Scan or Trav-
elstore function.
34
button :.
buttons :.
or
button : to
Setting the sensitivity of the
station search mode
You can choose whether you wish to
preset only strong or also poor-recep-
tion stations.
Press the MENU button 8.
Press the or
edly until "SENS" appears on the
display.
button :.
Press the
The display shows the currently set val-
ue for sensitivity. "SENS HI6" denotes
maximum sensitivity. "SENS LO1" is the
minimum.
buttons : to set the
Use the
desired degree of sensitivity.
When you have completed the set-
tings, press the MENU button 8
or the OK buttons ;.

Storing stations

Storing stations manually
Select the required FM memory
level, FM1, FM2, FMT or either
waveband MW or LW.
Tune into the desired station.
Hold down one of the preset sta-
tion buttons 1 - 6 > on which you
wish to store the station for more
than two seconds.
button : repeat-