System Connections; Connection To A Satellite Tuner (Simple Connections); Connection To A Satellite Tuner (Perfect Connections) - Philips VR1100/02X User Manual

S
YSTEM

Connection To a Satellite Tuner (Simple Connections)

Outdoor
Unit
Satellite Cable
Satellite Tuner Unit
DECODER VCR TV
Mains outlet
OUT
S
SORTIE
PAUSE
TELEC.
LP30713-006

Connection To a Satellite Tuner (Perfect Connections)

Outdoor
Unit
Satellite Cable
Satellite Tuner Unit
DECODER VCR TV
Decoder
OUT
S
SORTIE
AUDIO
L
AUDIO
OUT
R
PAUSE
TELEC.
LP30713-006
Mains outlet
C
ONNECTIONS
Aerial
Aerial
connector
Back of TV
TV Aerial
cable
ANT. IN
RF OUT
21-pin AV input
connector (SCART)
ANT. IN
ANTENNE
ENTREE
IN/OUT
AUDIO
ENTRE/SORTIE
L
AV1 (L-1)
AUDIO
OUT
IN/DECODER
R
ENTRE/SORTIE
RF OUT
AV2 (L-1)
ANTENNE
LP20914-005 SORTIE
21-pin AV input
Aerial
connector (SCART)
Back of TV
TV Aerial
cable
ANT. IN
RF OUT
EXT.2
ANT. IN
ANTENNE
ENTREE
IN/OUT
ENTRE/SORTIE
AV1 (L-1)
IN/DECODER
ENTRE/SORTIE
RF OUT
AV2 (L-1)
ANTENNE
SORTIE
LP20914-005
This is an example of simple connection if you
don't have a decoder.
Connect the satellite tuner to the VCR's AV2
(L-2)IN/DECODER connector, then connect the
VCR's AV1 (L-1)IN/OUT connector to the TV's
21-pin SCART connector.
NOTES:
• Set "A/V2 SELECT" to "A/V".
• You can use Automatic Satellite Programme Recording
function ( P.28) with this connection.
• To record a programme via the satellite tuner, select L-2
mode by pressing Number button "0" and/or CH 5/∞
so that "L-2" appears on the display window.
• For details, refer to the instruction manual for the
satellite tuner.
IMPORTANT
When you set "A/V2 SELECT" to "SAT"
( P.27), it is possible to view a satellite broadcast
with the TV set to its AV mode even if the VCR is
turned off. When the VCR is in Stop mode or
recording, press VCR/TV on the remote control to
turn off the VCR indicator on the display window.
If you turn on the VCR when the satellite tuner's
power is off, nothing appears on the TV. In this
case, turn on the satellite tuner, or set the TV to its
TV mode, or press VCR/TV to light the VCR
indicator.
This is an example of recommended connection
if you have both satellite tuner and decoder.
Connect the decoder to the satellite tuner's
connector, AV1 (L-1) IN/OUT connector to TV's
connector, and AV2 (L-2) IN/DECODER connector
to the satellite tuner's connector. Then connect the
EXT.1
satellite tuner and TV.
Aerial
NOTES:
connector
• Set "A/V2 SELECT" to "A/V". ( P.27)
• You can use Automatic Satellite Program Recording
function ( P.28) with this connection.
• To record a programme via the satellite, select L-2
mode by pressing Number button "0" and/or CH 5/∞
so that "L-2" appears on the display window.
• To receive a scrambled broadcast, descramble the
signal with the satellite tuner.
• For details, refer to the instruction manual for the
satellite tuner and decoder.
— 35 —