Using On-Screen Display; One Touch Recording (Otr); Record End Search - Philips VR1100/02X User Manual

A
DVANCED

Using On-Screen Display

You can display the VCR operating
status on the TV screen.
For the information about what you can
see on the TV screen, see page 6.
1
Select VCR Set Up Screen
1 Press VCR.
2 Press MENU.
3 Press 5 or ∞ to select "VCR SET
UP" then press OK/STATUS.
The VCR Set Up menu appears.
DSPC ON
\O. S. D.
ON
DIRECT REC ON
AUTO SP=LP TIMER OFF
DIGITAL 3R
POWER SAVE OFF
AUTO SAT
RECORD LINK OFF
NEXT PAGE
SELECT : 5∞
CHANGE :4
END : MENU
2
Set OSD
1 Press 5 or ∞ to select "O.S.D."
2 Press 3.
Each time you press the button, the
setting changes as follows:
ON:
The VCR operating status appears
on screen (The default setting is
"ON").
OFF:
The VCR operating status does not
appear on screen.
3
Finish Setting
Press MENU.
Notes:
• When you use this VCR as the player for
tape duplication, be sure to set "O.S.D."
to "OFF" before starting.
• During playback, the operation mode
indicators may be disturbed depending on
the type of tape being used.
O
PERATIONS

One Touch Recording (OTR)

The OTR function lets you quickly
specify how long you want a recording
to continue. You do not have to
programme the timer.
Make sure....
• The record tab on the cassette is not
removed.
• Your VCR, TV and antenna are
connected correctly.
1
On TV
1 Turn on the TV.
2 Select the video channel (or video
ON input).
2
On VCR
Insert a cassette with the record tab in
place.
The VCR turns on.
• If a cassette is already in the VCR, turn
on the VCR.
3
Select Channel Position
Press CH 5/∞ on the remote control
(or PROGRAMME 5/∞ on the front
panel) or Number buttons to select the
channel position to record.
4
Start OTR
Press REC/OTR ¶ twice.
Recording starts immediately, and the
(Record) indicator lights up and
blinks on the display.
5
Select Recording Length
Press REC/OTR ¶ repeatedly until the
desired recording length appears.
Each time you press the button, the
recording length increases in 30-minute
intervals.
=
0:30=1:00=1:30
REC (Normal recording)+
(C
.....
5:30=6:00
+ + + +
— 26 —
)
ONTINUED
To change the recording
length during an OTR
Press REC/OTR ¶ until the desired
length appears.
To cancel an OTR
Press STOP 7 to stop recording before
the preset recording length is reached.
If you want to cancel the OTR mode
but continue recording, press
REC/OTR ¶ several times until
(Record) indicator stops blinking.
Notes on the indications on the display
while an OTR operation
• During recording, the displayed time
counts down. When "0:00" is reached,
recording stops and the VCR turns off
automatically.
• If an OTR is engaged during pause, the
displayed time counts down normally, but
recording does not begin until you cancel
the pause.

Record End Search

This function enables you to search
forward to the next unrecorded portion
of the tape (or to the point at which
recording was stopped).
1 Press the REC END SEARCH
button. The VCR begins fast
forwarding or rewinding to find the
blank portion or the recording end
portion on the tape.SEARCHING
FOR REC END will appear on the
screen during the search.
2 The VCR automatically stop when
the blank portion or the recording
end portion is reached. REC END
SEARCH COMPLETED will
appear on the screen briefly.
The tape remaining tape time also
appears on the display panel.