Getting Connected Up; Vcr To Tv Connection Using The Rf Connection; Vcr To Av Tv Connection Using The Scart Connection - Philips VR1100/02X User Manual

G
ETTING

VCR to TV Connection using the RF connection

Connection
Diagram
Outdoor antenna
Cable
CAUTION
Do not plug the AC power cords until all
connections are completed.

VCR to AV TV Connection Using the SCART Connection

Make this connection if your TV has a 21-pin AV input connector (SCART) in order to reduce the possibility of interference.
And if you are using a stereo TV, you will need this cable in order to enjoy stereo playback of videotapes.
1. Complete the VCR to TV connection
using RF Connection.
2. Connect the scart cable between the AV1
(L-1) IN/OUT connector of the VCR and
the TV's 21-pin AV input connector
(SCART).
ATTENTION
After you perform Auto Set Up or
Preset Download ( P.10), you may
have to set "A/V1 OUTPUT" to
appropriate setting on the Menu
Screen. ( P.27)
Or, there may be a loss of colour on
the TV.
C
ONNECTED
To connect to a TV with No 21-pin AV input connector.
1 Disconnect the antenna or cable from the TV and the AC power cord
of the TV from the AC outlet.
2 Connect the antenna or cable to the VCR.
3 Connect the VCR to the TV using the RF coaxial cable.
4 Plug the AC power cords of the VCR and TV into the AC outlets.
Indoor antenna
OUT
S
SORTIE
PAUSE
TELEC.
LP30713-006
Back of VCR
U
P
ANT. IN
ANTENNE
ENTREE
IN/OUT
AUDIO ENTRE/SORTIE
L AV1 (L-1)
AUDIO
OUT
IN/DECODER
R
ENTRE/SORTIE
RF OUT
AV2 (L-1)
ANTENNE
LP20914-005 SORTIE
RF coaxial cable
RF OUT (supplied)
OUT
S
SORTIE
IN/OUT
AUDIO ENTRE/SORTIE
L AV1 (L-1)
AUDIO
OUT
IN/DECODER
R
ENTRE/SORTIE
RF OUT
PAUSE AV2 (L-1)
ANTENNE
TELEC.
LP30713-006
LP20914-005 SORTIE
21-pin
SCART cable
— 8 —
Back of TV
ANT. IN
VH F
UH F
From antenna
ANT. IN
ANTENNE
ENTREE
To TV
To TV`s 21-pin
input connector
(SCART)