Specifications - Philips VR1100/02X User Manual

B
EFORE
Miscellaneous
A cassette cannot be inserted.
The cassette does not eject.
The cassette ejects when you press REC/OTR¶ , or when
you press POWER or STANDBY/ON to set timer
recording.
S
PECIFICATIONS
Number of pre-programmable memory blocks
Design and specifications are subject to change without notice.
R
EQUESTING
General
Mains voltage
Mains frequency
Power consumption
Power On
Power Off
Power Save Mode
Ambient temperature
Relative humidity
Dimensions
Position for use
Video output channel
Possible number of TV channel
Number of days in advance
Tuner
Aerial input
VHF L:
VHF H:
UHF:
Video
Input (VIDEO IN)
Output (VIDEO OUT)
Resolution
Signal/noise ratio
Audio
Input (AUDIO IN)
Output (AUDIO OUT)
Accessories supplied
S
ERVICE
Correction
• Insert the cassette with the window side up and the record
tab facing you.
• Check that a cassette tape is not already inserted. Press
STOP/EJECT 0.
• Make sure the AC power cord is correctly connected to
an AC outlet.
• If the (Timer) indicator is lit on the display, press
POWER or STANDBY/ON to cancel timer recording,
then press STOP/EJECT 0.
• Make sure the record tab on the back of the cassette is not
removed. ( P.22)
AC 220 V – 240 V
50 Hz/60 Hz
23 watts
5.2 watts
3 watts
+5°C to +40°C
10% to 80%
Approx. 435(W) x 94(H) x 343(D) mm
Mass Approx. 4.7kg
Horizontal
UHF E36 (adjustable between 22 — 69)
99
8
365 or every day, or every week
B/G, D/K
47 MHz — 89 MHz
104 MHz — 300 MHz
302 MHz — 470 MHz
470 MHz — 862 MHz
CATV
0.5 V(p-p) to 2.0 V(p-p), 75 ohms
1.0V(p-p) ± 0.2 V(p-p), 75 ohms
250 lines (VHS)
400 lines (S-VHS)
Better than 45 dB
–8 dBs, 50k ohms (0dBs=0.775 Vrms) – for RCA connector
–8 dBs, 10k ohms (0dBs=0.775 Vrms) – for SCART connector
–8 dBs, 1k ohms (0dBs=0.775 Vrms)
Remote control unit
RF coaxial cable
Batteries – R6(SUM-3)/AA
— 40 —
(C )
ONTINUED