Compliance And Environmental Information - Keysight Technologies U4431A Hardware And Probing Manual

Compliance and Environmental Information

Table 3
Safety Symbol
Table 4
Safety Symbols
Keysight U4431A MIPI M-PHY Protocol Analyzer Hardware and Probing Guide
Compliance and Environmental Information
Description
CSA is the Canadian certification mark to demonstrate compliance with the Safety
requirements.
The C-tick mark is a registered trademark of the Spectrum Management
Agency of Australia. This signifies compliance with the Australia EMC
Framework regulations under the terms of the Radio Communication Act
of 1992.
CE compliance marking to the EU Safety and EMC Directives.
ISM GRP-1A classification according to the international EMC standard.
ICES/NMB-001 compliance marking to the Canadian EMC standard.
KC certification mark to demonstrate compliance with the South Korean EMC
requirements.
South Korean Class A EMC declaration
This equipment is Class A suitable for professional use and is for use in
electromagnetic environments outside of the home.
Environmental Information
Description
This product complies with the WEEE Directive (2002/96/EC) marking requirements.
The affixed label indicates that you must not discard this electrical/electronic
product in domestic household waste.
Product Category: With reference to the requirement types in the WEEE Directive
Annex I, this product is classed as a "Monitoring and Control Instrumentation"
product.
Do not dispose in domestic household waste.
To return unwanted products, contact your local Keysight office, or see
www.keysight.com/environment/product/
for more information.
9