Table of Contents
Advertisement
2
Setting up a U4432A SMA Differential Probe Configuration
N5426A ZIF Tips
A N5426A ZIF tip kit is included in the U4433A probe shipment. This kit has a set of 10 12GHz
InfiniMax ZIF tips.
The following figure displays a N5426A ZIF tip kit with 10 ZIF tips
Figure 7
A ZIF tip is a connection accessory used to connect the flying lead cables of the probe to the DUT.
This tip connects to a flying lead cable on one end using a zero insertion force connector and is
soldered onto the DUT on the other end.
The following figure displays a N5426A ZIF tip soldered onto a DUT and ready to be connected to a
flying lead cable of the probe.
Figure 8
You need to solder the ZIF tips onto the DUT before plugging in the flying lead cables in these tips.
Refer to the topic
If you need more ZIF tips than the number of ZIF tips included in the probe shipment, you can order
these from www.parts.keysight.com. On this site, specify the product number as N5426A in the Find
a Part section and then click Find. Alternatively, you can contact your nearest Keysight Sales office
for assistance.
26
N5426A ZIF Tip Kit
Flying Lead Cable of U4433A Probe
U4433A Probe Connection to ZIP Tip
"Installing a U4433A Probe"
Keysight U4431A MIPI M-PHY Protocol Analyzer Hardware and Probing Guide
N5426A ZIF Tip
on page 28 to know how to attach a ZIF tip to a DUT.
Advertisement
Table of Contents
