Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for TREND T4 USA
Summary of Contents for TREND T4 USA
- Page 1 PLUNGE ROUTER...
-
Page 2: Table Of Contents
T4 - USA Dear Customer TECHNICAL DATA Thank you for purchasing this Trend product, we Voltage: 110V hope you enjoy many years of creative and Ampage: 6.6A productive use. Power input Please remember to return your guarantee card No load speed 11,500-32,000 rpm within 28 days of purchase. -
Page 3: Safety
T4 - USA SAFETY 18. Connect dust extraction equipment. temperature so your hands are not If devices are provided for the cold. Connect machines that are used WARNING: connection of dust extraction and in the open via a residual current collection facilities, ensure these are device (RCD) with an actuation Observe the safety regulations in the... - Page 4 15. All fastening screws and nuts should be adhered to. Recommended speeds and guide bush are concentric. be tightened using the appropriate are shown in the Trend Routing wrench or key and to the torque value Router Bit Repair/Maintenance Catalogue and/or website.
-
Page 5: Electrical Safety
T4 - USA Electrical Safety Power Supply Never connect the live (L) or The electric motor has been designed for one neutral (N) wires to the ground voltage only. Always check that the power pin marked E or supply corresponds to the voltage on the rating plate. -
Page 6: Noise/Vibration
T4 - USA NOISE/VIBRATION ITEMS ENCLOSED The noise level when working 1 x Parallel side-fence with rods can exceed 85 dB(A). 1 x Collet 6mm Wear ear protection! 1 x Collet 6.35mm ( ”) fitted to machine Level of sound pressure : 1 x Collet 8mm Lpa (sound pressure) 91.1 dB(A)1 1 x Guide bush 5/8”... -
Page 7: Description Of Parts
T4 - USA DESCRIPTION OF PARTS Plunge locking lever Depth stop Motor to base locking nut Motor housing Power cord On/Off switch Grip knob Variable speed control dial Collet nut Collet spring (fitted behind collet) Thumb knob to secure fence rods Router base Template guide bush dia. -
Page 8: Assembly & Adjustment
T4 - USA ASSEMBLY & ADJUSTMENT ” Fitting and Removing the Dust Extractor Spout ■ Insert the extractor spout (1) into the base of the router. ■ Fit the two countersunk headed screws (2) through holes (A) from beneath and screw-on into the captivated nuts in the spout. -
Page 9: Switching On & Off
T4 - USA Switching On & Off ■ A slide switch on the front of the motor body is used to turn the router on and off. When Make sure the machine is fitting the motor unit to the base, ensure that switched off before connecting the switch is facing forwards. -
Page 10: Fitting & Removing Bits
T4 - USA How to Fit and Remove a Router Bit Fitting Bits ■ Insert at least of the shank length of the bit (1) into the collet assembly (2). ■ Press the spindle lock (2) until the router spindle is locked (you may need to turn the spindle slightly to engage it). -
Page 11: Speed Control
T4 - USA Electronic Speed Control Dial Setting The speed is infinitely variable from 11,500 to 32,000 RPM using the electronic speed control dial (1) for uniform cutting results in all types of wood, plastics and in aluminium. ■ Turn the electronic speed control dial to the required level. -
Page 12: Operation
T4 - USA OPERATION Cutting Direction Sequence of plunging The direction of routing must always be opposite to the bit’s direction of Step One rotation, otherwise there is a risk of Plunge down and lock the motor carriage, with the kick-back. -
Page 13: Side-Fence Routing
T4 - USA Side-Fence Routing The side-fence is used to guide the router when moulding, edge profiling or rebating the edge of the workpiece or when routing grooves and slots in the centre of the workpiece, parallel to the edge. The edge of the workpiece must be straight and true. -
Page 14: Template Guide Bush Routing
T4 - USA Using the Guide Bush The 5/8” guide bush (1), or the adapter plate for screw on style bushes, is fastened to the router’s base from beneath using the two M5 countersunk machine screws (2) supplied. Routing with a Template The guide bush is used in conjunction with a Template template when the routing operation is repetitive... -
Page 15: Carving & Grinding
T4 - USA Removing the Router from the Plunge Carving and Grinding Base Carving and grinding applications can be carried ■ Never separate the router from the base while out with the router removed from its plunge base. When using the router in this way, only a bit is fitted in the collet. -
Page 16: Bearing Guided Bits
T4 - USA Bearing Guided Bits Edge profiling and shaping bits are available with a bearing fitted to the end. This enables shaped or straight workpieces to be routed without the need for a guiding device such as a side-fence or batten. -
Page 17: Freehand Routing
A V groove bit is ideal for engraving designs at shallow depths. The Trend clamp guides have integral clamping mechanism for quick Batten Routing & accurate guiding of the router. Where a side-fence cannot be used, it is also Open... -
Page 18: Maintenance & Care
Changing Brushes changing. ■ After about 40 operating hours inspection by a authorised Trend service agent is recommended. Ensure machine is isolated from power supply. ENVIRONMENTAL PROTECTION Recycle raw materials instead of disposing as waste. -
Page 19: Spare Parts List
T4 - USA T4 USA - SPARE PARTS LIST v2.0 08/2007 Qty. Desc. Ref. Stator Housing WP-T4/001 Top Vent Housing WP-T4/002 Base WP-T4/003 Spring Washer 4mm WP-T4/004 Washer 4mm x 7mm x 0.8mm WP-T4/005 Cord Guard WP-T4/006 Speed Control Circuit Board 110V USA... - Page 20 T4 USA - SPARE PARTS LIST v2.0 08/2007 Qty. Desc. Ref. Plunge lever Torsion Spring 1/2” Dia WP-T4/045 Grip Knob WP-T4/046 Plunge Spring WP-T4/047 Plunge Column WP-T4/048 Machine Screw Socket M5 x 12mm WP-SCW/12 Dust Extraction Spout Upper Housing WP-T4/050...
-
Page 21: Spare Parts Diagram
T4 - USA T4 USA - SPARE PARTS DIAGRAM v2.0 08/2007 -20-... - Page 22 Web: ______________www.trend-usa.com RECYCLABLE © Copyright Trend 2007. No part of this publication may be reproduced, stored or transmitted in any form without prior permission. Our policy of continuous improvement means that specifications may change without notice. Trend Routing Technologies Inc.
Need help?
Do you have a question about the T4 USA and is the answer not in the manual?
Questions and answers