Miele KWT 2601 VI Operating And Installation Instructions page 18

Installation
. . . with partition wall
The wall a between the side-by-side
wine conditioning units/refrigeration
appliances must be at least
5/8" (16 mm) thick.
If the door hinges of the appliances
are next to each other, you must take
into account the thickness of the
cabinet fronts and door handles so
that the appliance doors do not col-
lide and become damaged if they are
opened at the same time.
The wine conditioning units/refrigeration
appliances are secured individually in
their installation niche using the sup-
plied installation material.
18
If the partition wall a is narrower than
6 5/16" (160 mm), you will need the
side panel heater from the side-by-side
installation kit to prevent condensation
from forming and any resulting damage.
When planning installation niches,
please note that the niche into which
the appliance with the side panel
heater is installed must be
3/16" (4 mm) wider (see "Installation
– Installation dimensions").
If the partition wall a is thicker than
6 5/16" (160 mm), you do not need the
side-by-side installation kit, nor the side
panel heater.