Before Installation - Miele KWT 2601 VI Operating And Installation Instructions

Before installation

 Before installation, remove any ac-
cessories from the back of the appli-
ance.
 Check the wine conditioning unit for
damage during transportation.
Do not install the wine conditioning
unit if it is damaged.
 Check that all parts at the back of the
appliance are unhindered.
 To protect the floor during installation,
secure an off-cut of flooring or similar
material to the floor in front of the in-
stallation area.
 Do not remove the installation aids 
from the appliance door. These will
be required later for aligning the ap-
pliance in the installation niche.

Risk of damage and injury from
the wine conditioning unit tipping
over.
As soon as you unscrew the brack-
ets that fix the wine conditioning unit
to the pallet, the appliance is no
longer secured.
Due to its weight and size, the wine
conditioning unit must be installed
by two people.
 Unscrew the fixing brackets .
 With the help of several people as re-
quired, carefully lift the wine condi-
tioning unit from the pallet, starting
with the back of the appliance.

Risk of damaging the floor from
the load.
Moving the wine conditioning unit
can cause damage to the floor.
Move the wine conditioning unit
carefully on floors that are sensitive
to scratching.
As soon as you have set the wine con-
ditioning unit upright, you can move it
using the rollers on the bottom.
Installation
2
27