Miele KWT 2601 VI Operating And Installation Instructions page 31

 Affix edge protection  to the adja-
cent cabinet fronts.
 Insert the plug connector at the back
of the wine conditioning unit (see "In-
stallation – Electrical connection").
 Insert the plug  into the electrical
socket.
The electrical socket should be close
to the wine conditioning unit and
easily accessible.

Risk of damage due to electrical
overload.
If the wine conditioning unit is electri-
cally overloaded, this can cause a
short circuit and therefore damage to
your appliance.
When you install appliances side by
side, each appliance must have its
own separate electrical socket.
Tip: Secure the power cord to prevent it
becoming caught: tie a piece of string
to the middle of the power cord and as
5
the wine conditioning unit is being
pushed into the niche, pull the cord for-
ward underneath the appliance.
6
 Push the wine conditioning unit care-
fully into the installation niche.
 If the wine conditioning unit cannot
be pushed into the niche (because
the floor is uneven, for example), un-
screw the rear feet slightly (see "In-
stallation – Aligning the wine condi-
tioning unit") and slide the appliance
into the installation niche.
 Remove the edge protection  from
the adjacent cabinet fronts.
Installation
31